Build List | OpenBuilds
Open Builds. I built this cnc using 2 z axis actuators thinking it would minimize deflection and it seems to be very sturdy. I used 2 1500mm c...
Read Openbuilds.com news digest here: view the latest Open Builds articles and content updates right away or get to their most visited pages. Openbuilds.com belongs to a large group of moderately popular websites, with around 296K visitors from all over the world monthly. It seems that Open Builds content is notably popular in USA, as 38.2% of all users (113K visits per month) come from this country. We haven’t detected security issues or inappropriate content on Openbuilds.com and thus you can safely use it. Openbuilds.com is hosted with CloudFlare, Inc. (United States) and its basic language is English.
Content verdict: Safe
Website availability: Live
Language: English
Last check:
-
9 881
Visitors daily -
9 881
Pageviews daily -
3
Google PR -
105 680
Alexa rank
Best pages on Openbuilds.com
-
I built this cnc using 2 z axis actuators thinking it would minimize deflection and it seems to be very sturdy. I used 2 1500mm c channels for my x axis, 1 1500mm c channel for my y axis, nema 23 step...
-
Found this cool easy to use inexpensive ($25) software that creates GCode from a DXF. Free demo available as well Supports .dxfDrawings Automatic...
-
Share helpful software relating to machine control or design
Openbuilds.com news digest
-
13 days
Touch Plate Not working after spindle upgrade
Hello,
I have just completed upgrading my spindle to a VFD water cooled one. But since doing that my touch probe is closing the circuit (led on) when you touch the bit rather than when the bit takes contact with the plate. I have plugged the VFD to isolate... -
13 days
Hi Guys
Im sure i have already posted this but i cant find the original post.
I am still searching for macro code for my blackox controller to probe center of a hole. -
13 days
Generate g-code send to openbuilds control
Looking for some advice just recently started using openbuilds controller ( 2 weeks ago) everything was fine until today. Can generate g-codes but missing the part where you send it to openbuilds control. Hopefully its just one of my moments but can...
-
13 days
OpenBuilds X32 BlackBox firmware upgrade
To whom it may concern:
I am running v1.0370 Openbuilds Control software with the OpenBuilds X32 BlackBox controller.
Should I be checking for the latest GRBLHAL firmware on the hardware (controller)?
Domain history
| Web host: | CloudFlare, Inc. |
| Registrar: | CloudFlare, Inc. |
| Registrant: | DATA REDACTED |
| Updated: | April 15, 2024 |
| Expires: | March 22, 2025 |
| Created: | March 22, 2012 |
Whois record
Visitor gender
Male
Female
Safety scores
Trustworthiness
N/AChild safety
N/A
