Custom Made Personalized Outdoor Wooden Signs

Instructions for your double post installation:
It is important that you follow these instructions for relatively easy installation.
1…At the location that you want the sign placed, dig two post holes, atappropriate distance or space between post, making sure that the holes are parallel to the direction you intend the sign to face. Post hole diggers usually create holes approximately...

Most of our signs have Keyholes installed in the back of the sign. The following will help you hang your sign….
!..measure the distance between the narrow part of the keyhole on one edge (2nd & 3rd picture)
2..transfer that measurement to your wall (or post) by making a mark on the wall and then a second mark at the measured distance. It helps to use a leveling tool to keep these holes at equal heights from the floor....

Many people want their sign mounted to a post. Signs with keyhole can be easily attached to posts in much the same way as hanging the sign on a wall.
(you can refer to our post on keyhole slots)
To install the post in the ground….dig a post hole…typical post hole digger creates a 6 inch round hole. make the hole at least 1/3 plus a little for bedding rock, the depth of the entire length of post.. (a three foot post would be buried 1 foot. Now...

How do I refinish my sign.
It is sad but true, some day, you will have to refinish your sign to give it the just made look. Be it an outdoor sign facing the elements or indoors with to much sun through the window, there comes a time to decide. If you do nothing, eventually, the...